• Welcome to www.fastfrogs.co.nz - Fast Frogs The NZ home for Fast French Cars .

Golf GTI > Clio 182

Started by philwalter, March 22, 2009, 05:54:51 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

philwalter

The 182 has had a birthday. Such a great car decided to spend the money and keep.

Got new cambelt, waterpump, aux belts etc etc. New rotors and pads all round, Powerflex bushes in the front ARB's and wishbone. Just a set of new tires now before the next WOF which I have budgeted for.

Getting some upholstery fixes in the next week. Some rips on the drivers seat bolster.

The Powerflex upgrades have made a huge different to the tightness of the car up front. Massive improvement.

Would love to get a Miltek exhaust, but so much $$

Got in all the parts myself...even with freight ( from UK) and tax there were some massive savings over buying here, and all genuine Renault.


Pee Dubbaya

Current: Peugeot 205 GTI 16v  +  504 (Project)

Previous: Peugeot 106 Rallye (S1), 205 GTI Mi16, 206 GTI 180, 306 S16 (Ph1) & GTI-6 (Ph2) & GTI (Ph3), 309 GTI 16v, 405 Mi16 & SRDT x2, 406 HDi, 504 GL & 504 Break                     Citroën ID19, BX TZD, Xantia 2.0

philwalter

#47
I also added a front splitter. This is a Skoda part off a Fabia and apart from a little trim at the end, fit the 182 perfectly. Makes the front look a lot nicer.

Updated pic.


[attachment deleted by admin]

2052NV


philwalter

Cheers. I have a work trip to the UK in Novemeber. Hoping to bring back a set of Koni's and an exhaust system with me then. And what ever other goodies I can fit in. Hope the exchange rate is as good then as it is now.

I also got it a clutch for sometime in the future.

philwalter

I felt like a bit of a change - the car is perfect, but just wanted to give it a wee styling tweak.

Plastidipped the wheels white, applied some vinyl Gordini stripes and restored the grill on the front bumper. Did it all myself at minimal cost - won't be to everyones taste, but I like it for now :-)





MYRUSH

Present:
Pug 106 XSi 1.6
Pug 106 Rallye S1
BMW M5 E60 V10
Pug 306 Cabrio 2.0

Past:
Pug 406 Sedan
2x Pug 406 V6 Sedan
Pug 406 V6 Coupe
Pug 205 GTi 1.9
4x Pug 106 XSi 1.6
Pug 106 Diesel

BigPete


Mungous

Looks awesome! Let me know how well the white PlastiDip works out - I worry it won't like brake dust or brake heat...
"A person is smart. People are dumb, panicky dangerous animals"

Gone:
'63 ID19, '67 Land Rover Safari, '71 GS1015, '74 GS1220, '76 GSX2, '80 GSA, '86 BX19GT, '89 BX19GTi, '91 BX16 Meteor, 2003 M5, '08 308

In a garage:
'89 BX 19 GTi 16 valve
'90 BX16v
'98 Saxo VTS

RS


Looks awesome. You have a good eye for detail.

I am striping my white Clio with blue stripes!

CaM

saw a 182 crusing round feilding before.
realyl grown on me the last few weeks. so cool.
1959 Citroën ID19 Slough
1990 Peugeot 205Mi16

puggy21

those white wheels look choice!!
1988 1.6 205 gti , 1998 406 3l v6(sold) , 2007 vw golf gti dsg, 1997 ford escort 1.6 zetec

MYRUSH

Quote from: Mungous on February 05, 2015, 11:10:36 PM
Looks awesome! Let me know how well the white PlastiDip works out - I worry it won't like brake dust or brake heat...
You are right, long term it doesn't like dust or heat. When I did mine, after track day kinda heat, it bubbled in a few areas where the plastidip probably didn't bond exceptionally well (I didn't run over the wheels with degreaser or anything, nor did I rough up the paint underneath).
And brake dust loves to be soaked up in the plastidip, you can wash half of it away but the other half stays.
You can find some cleaners to clean it off, but you will essentially be removing a thin layer of rubber too, so you can't wash it too many times.
Present:
Pug 106 XSi 1.6
Pug 106 Rallye S1
BMW M5 E60 V10
Pug 306 Cabrio 2.0

Past:
Pug 406 Sedan
2x Pug 406 V6 Sedan
Pug 406 V6 Coupe
Pug 205 GTi 1.9
4x Pug 106 XSi 1.6
Pug 106 Diesel

philwalter

Quote from: PUG406 on February 06, 2015, 02:35:09 PM
Quote from: Mungous on February 05, 2015, 11:10:36 PM
Looks awesome! Let me know how well the white PlastiDip works out - I worry it won't like brake dust or brake heat...
You are right, long term it doesn't like dust or heat. When I did mine, after track day kinda heat, it bubbled in a few areas where the plastidip probably didn't bond exceptionally well (I didn't run over the wheels with degreaser or anything, nor did I rough up the paint underneath).
And brake dust loves to be soaked up in the plastidip, you can wash half of it away but the other half stays.
You can find some cleaners to clean it off, but you will essentially be removing a thin layer of rubber too, so you can't wash it too many times.

Yeah - I expect to agree with all that. My thinking was use the Plastidip to do it cheap and easy ( and it was so easy ! - masking the wheel with a pack of playing cards) to see if I liked the look, and then when it starts looking ratty, then look at a powdercoating option.

Or if anyone has any OZ Racing 16x7 4x100 Superleggera or similar - then please let me know !

MYRUSH

Yeah, Plastidip is very good to get an idea of what the car would like with X colour wheels. One day, ill peel mine off and paint it. White Superleggeras would look absolutely choice on this!
Present:
Pug 106 XSi 1.6
Pug 106 Rallye S1
BMW M5 E60 V10
Pug 306 Cabrio 2.0

Past:
Pug 406 Sedan
2x Pug 406 V6 Sedan
Pug 406 V6 Coupe
Pug 205 GTi 1.9
4x Pug 106 XSi 1.6
Pug 106 Diesel