• Welcome to www.fastfrogs.co.nz - Fast Frogs The NZ home for Fast French Cars .

New Member

Started by cjsgti, August 18, 2013, 01:57:38 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

cjsgti

Hi, I am a new member with a 1989 205 GTI 1.9 that I have just acquired.


As usual there are a few things that don't work properly.  The tacho keeps blowing its fuse and stopping working - any thoughts? and the gear lever is very sloppy.  I think that you can improve this with bushes, though it seems that they were like this all the way through.  The driver's window doesn't want to go up as fast as it goes down and you have to help it over the last inch or so.  Can anyone point me in the direction of a rear fog lamp and washer jet?  Cheers.

cams16v

Hello and welcome along
I might be able to help with some products for the sloppy gear lever (bronze gear stick pivot bushes)
Cheers Cam  :)

2052NV

Welcome!! Where are you located? as you should look at coming with us on this meet

http://www.fastfrogs.co.nz/index.php/topic,9041.0.html

Also i would highly advise going for a full set of alloy gear linkages as the factory ones have plastic cups in them that totally fall apart and are no good. here is what you want and CAMS16V is the NZ agent for baker BM stuff

http://www.bakerbm.com/205.php?data=bbush205linkage
http://www.bakerbm.com/205.php?data=bbush205gearstick
http://www.bakerbm.com/205.php?data=gearrods205

Note the majority of the play will be fixed with the rod kit